SPT C50, 1000mm laser tube is a great candidate for industrial engraving and cutting leather, wood, and thin acrylic.
Note: This laser tube is not designed for the K40 machine which requires the 700~720mm CO2 Sealed Laser Tube instead.
Why SPT Laser
Click to know about SPT
Why buy Laser Tubes from LightObject?
1) We're located in USA (Sacramento, California). No U.S. Customs issues
2) We provide great tech support. We are knowledgeable, and we know what we're selling. Check out our support forum at LightObject.info. There you can ask us questions, tap into our vast customer network for support and visit our FAQ section as well!
3) Fast turn around time for tube replacement
4) Competitive pricing because we deal directly with the manufacturers
5) High quality and professional packing
6) We test each tube with industry grade laser power meter before it is shipped from California
Specifications
Max current: 18mA
15~16mA;
Note: 600W water chiller with a compressor (refrigerant) is highly recommended for cooling.
Shipping
The default shipping method is UPS ground. Please contact us for the price if faster service is needed.
Note: Shipping Rate provided by our system is applied to the continental 48 contiguous states in the USA. Hawaii, Alaska and rest of the world will be subjected to different shipping rate. Contact us to get a shipping rate before placing your order.
Courtesy reminder
Any damage that happens on the shipment; the buyer must report to us within 3 business days after receiving it. If failed to do so; this will result in the rejection of all claims. Customers must file a report to the carrier and keep all shipping materials handy for inspection. We're not responsible for any internal cracked after receiving, any damage caused during transportation covered by insurance. The buyer is responsible for the shipping cost of a replacement tube if the order date is out of 30 days. Warranty acceptance or denial is subjected to the decision made by the tube manufacturers. Lightobject is not responsible for a denial under any circumstance.
I've wasted so much time in my life...
I've bought a few 35w tubes from Marco over the years for my Full Spectrum Pro 20x12 and Hobby 5th Gen and they have all been great. I decided to try to fit this tube into my Pro laser, and I'm blown away. My jobs used to have to run at 1000 dpi, half speed to get the depth I was needing. Put this one in, first job was at 500dpi, 80% speed and it's way too deep! I'm going to be saving probably an hour on my big jobs, which I run up to 10 hours a day. Chances are I'll be able to double my production with this thing. Wish I didn't wait years on this...
Review by Matthew on 9/18/2019
3 years and still working well
UPDATE: We've been running this tube in our Makerspace laser cutter for 3 years now. It gets heavy use and is still going strong. Highly recommende. We will definitely buy this tube again.
Review by Mike on 9/4/2019