Heatless Compressed Air Dryer Systems

Approx. Price: 

Rs 5.4 Lakh

/ Unit

Get Latest Price

Product Details:

Minimum Order Quantity1 UnitDryer TechnologyBlower Reactivated Air DryersBrandTRIDENTDryer Horse Power12-90kwMinimum Output Dew Point-40 CModel Name/NumberDB200-4000Maximum Pressure7 barUsage/ApplicationCompressed Air dryersCapacity200-4000CFMCountry of OriginMade in India
Blower Reactivated Air Dryers DB Series:
Principle of Operation:
The Blower Heat Reactivated Dryer works on the principle of Thermal swing. The desiccant adsorbs moisture from the compressed air to deliver dry air. The desiccant bed saturates over a period of time. The saturated bed is regenerated by heating with hot air generated using a blower. Hence the dryer is called blower heat reactivated desiccant dryer. Since the temperature of the bed swings between the compressed air temperature and the regeneration temperature it is called Thermal swing type. The hot air from the blower passed through a heater. This makes the air very dry. The hot air then heats up the desiccant bed. When the bed is heated it gives up the moisture adsorbed and is ready for adsorption. The hot air carries this moisture to the atmosphere. After the regeneration, heated desiccant bed is cooled by the flow of air to suit the application conditions. Final cooling is achieved by a no loss compressed air cooling method, resulting in a no Dewpoint spike system. Trident dryer comes with a dewpoint based control system as a standard. The tower changeover takes place only when the bed is saturated, resulting in energy saving and extended life. The dryer with its control valves and controller manages the drying, regeneration and repressurisation of the desiccant columns automatically and thereby delivering continuous dry compressed air. Blower Heat Reactivated Dryers are best suited for applications requiring large volume of compressed air at low dewpoint. For the above conditions the dryer works out very economical energy wise. Trident blower heat reactivated dryers are built from the start for customization. Since the air volume is large cusomisation delivers substantial energy savings.

Designed for Air Inlet Pressure 7 Kg/cm2
Designed for Air Inlet temperature 45oC
Designed for Ambient temperature 38oC
Desiccant : Activated alumina with adsorption capacity 10%

Request
Callback

The Blower Heat Reactivated Dryer works on the principle of Thermal swing. The desiccant adsorbs moisture from the compressed air to deliver dry air. The desiccant bed saturates over a period of time. The saturated bed is regenerated by heating with hot air generated using a blower. Hence the dryer is called blower heat reactivated desiccant dryer. Since the temperature of the bed swings between the compressed air temperature and the regeneration temperature it is called Thermal swing type. The hot air from the blower passed through a heater. This makes the air very dry. The hot air then heats up the desiccant bed. When the bed is heated it gives up the moisture adsorbed and is ready for adsorption. The hot air carries this moisture to the atmosphere. After the regeneration, heated desiccant bed is cooled by the flow of air to suit the application conditions. Final cooling is achieved by a no loss compressed air cooling method, resulting in a no Dewpoint spike system. Trident dryer comes with a dewpoint based control system as a standard. The tower changeover takes place only when the bed is saturated, resulting in energy saving and extended life. The dryer with its control valves and controller manages the drying, regeneration and repressurisation of the desiccant columns automatically and thereby delivering continuous dry compressed air. Blower Heat Reactivated Dryers are best suited for applications requiring large volume of compressed air at low dewpoint. For the above conditions the dryer works out very economical energy wise. Trident blower heat reactivated dryers are built from the start for customization. Since the air volume is large cusomisation delivers substantial energy savings.Designed for Air Inlet Pressure 7 Kg/cm2Designed for Air Inlet temperature 45oCDesigned for Ambient temperature 38oCDesiccant : Activated alumina with adsorption capacity 10%

Additional Information:

• Production Capacity: 1-10
• Delivery Time: 4-6weeks
• Packaging Details: Wooden Box