In Today’s Industrial zone this compressed air dryer is playing an important role in many applications. Capitalizing on our manufacturing unit we design, manufacture and supply superior quality compressed air dryers & gas drying systems. Our designed Air Dryers is for high-end Industrial applications to provide better protection against condensate damage. As per commercial point of view compressed air dryer are very cost effective and we also offer intelligent energy and Purge loss saving control for all drying processes.
In Heatless Air Dryer two adsorber towers filled with Activated Alumina / Molecular Sieves to absorb the moisture present in the wet compressed air. Wet incoming compressed air or gas is passed through an adsorber tower where moisture is adsorbs to achieve better dew point.The dry air comes through the top of tower. After some time of operation activated alumina needs regeneration. Reactivation or regeneration of activated alumina is necessary to drive off the adsorbed moisture and to restore its absorptive capacity.This is accomplished via purging the adsorbent by dry air or gas at atmospheric pressure and temperature in reverse direction. The purge loss in around 10% of dry air. Changeover will take place through PLC/timer and continuous dry air will be received at outlet.
PURGELOSS of 10% is reduced up to 5% by integrating online dew point transmitter to the Sequential programmer. Drying Tower changeover takes place when dew point goes down the desired limit which results in huge saving of purge air.