Friction Washer: Plastic Waste Scrap Washing Line Machine Manufacturer

friction washer plastic film waste scrap washing line machine manufacturer for raffia bag, hd, ld, MLP, etc in Ahmedabad, Gujarat, India

This is our most successful plastic waste washing machine. It is a high end washing system which is adapted to almost every type of plastic waste washing requirement. A specially designed, machined and balanced rotor is one of a kind which delivers unparalleled washing results for almost every type of plastic waste in a continuous fashion. As Dollplast’s flagship washing line we thrive to design it better every time, improving and innovating to provide you with most economical results.

Plastic film waste friction washing machine specifications:

Drive system-

• The rotor is driven by a pulley belt system, which reduces the shocks of high load and thus reducing damage in the long run.
• Each rotor is carefully designed and precision balanced for minimised vibrations.
• With an open drive system, it is very easy to maintain and run the machine with least downtime possible.

Plastic waste Friction washing system-

• The friction washer directly receives grinded wet plastic film / article waste from above. It is placed at a slant angle to create an opposite flow against water and improve washing quality.
• The washing system is one of a kind high speed rotor thrashing the waste against the mesh to clear out the toughest of dirt stains.
• The rotor has multiple thick flaps and is perfectly balanced for steady output and low vibrations.
• The water is pressure injected on the top side and the dirty water exits the washer via a drain unit at the bottom. This is also the drainage point of the grinder, making it easier to feed dirty water into the filtration system (not included in the setup)
• Clean and grinded plastic waste is ejected from the other end of the washer. This side is raised and the material directly falls into the feeder of the dryer / densification machine.

Plastic waste friction washer construction-

• The Rotor is made of MS with a protective anti-corrosion coating.
• Surrounding mesh and other material / water contact parts are made of SS
• The body is made up of heavy MS.

Drying and densification system-

• The wet, grinded and clean plastic waste then enters the drying and densification machine, also known as SD.
• The material is first squeezed to remove most of the excess water by a purpose built screw.
• The Barrel lets the water out, collecting and discharging it through a pipe.
• The material moves further and is semi melted above 100 degrees centigrade resulting in total evaporation and drying of material.
• The plastic film material and then consequently densified and cut into small chunks.

Drying and densification construction-

• Machined screw and barrel for optimum performance.
• Heavy and robust MS body with precision cut spaces for smooth operation.
• Strip heaters for the semi melting process along with a final material cutter for creating small chunks of densified clean film plastic waste.

Plastic film waste automatic grinding, washing, drying and densifying machine suitable for material types-

Any type of plastic film waste can be processed through this setup.

• PP, raffia bags
• HD / LD film waste
• MLP film waste
• BOPP, etc
• Any type of plastic film waste can be processed.