SMD LED size for beginners

16 Nov.,2022

 

rgb smd led

Forum navigation:
At the top, just below 'Hello <your_name>'
you will see 'Show new replies to your posts.'  Click it for a list of UNREAD replies to your posts.   If you need to go back to something you posed to but have already read, goto your profile and use show posts, find the last post you made to the topic in question and click the link to get back to the actual topic.   If you need to 'bookmark' a post to reread and don't want to reply you can simply use the button to thank it, as show posts also has a section for stuff you've thanked.

Many SMD LEDs are excessively fragile if hand soldered, and really need  reflowing with a well controlled temperature profile for reliability.  It is possible to hand-solder many packages but even slight pressure on the package when its hot can result in failure, and manual hot air reflow may cook the LED.  Damaged bond wires may not initially cause a problem if they are still making contact but may cause the LED to start blinking due to intermittent contact, or fail totally a considerable time later.  As such whenever manual assembly is a requirement its worth choosing a package and laying out the board for easy assembly - extra pad length so you've got room to get the iron tip on it without nudging the LED, and try to avoid small packages, and ones that have a substrate heatsinking pad under the package.