2.5x40 Commercial RO Membrane Element Applied Membranes M-T2540A

AMI commercial RO membrane elements produce high quality water from tap or brackish water in commercial reverse osmosis systems, and are among the finest in the industry.  With hundreds of thousands of membranes in operation in water filtration systems world-wide, AMI membranes have earned a reputation of delivering consistent, reliable, and long lasting  performance, making AMI Membranes the natural choice for use in commercial RO systems.  AMI Commercial RO Membranes are constructed of tap water TFC (thin film composite) membrane material and fit industry-standard PVC and Stainless Steel RO Membrane Housings. 

AMI Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested.

 

Specifications for M-T2540A

   AMI Part Number: M-T2540A Membrane Size (Nominal): 2.5 x 40 Membrane Dimensions: 2.5"Dia. x 40"L Flow Rate: 1,000 GPD (3,785 LPD) Applied Pressure: 225 psi (1.6 MPa) Stabilized Salt Rejection: 99.5% For Housing: Standard 2.5" x 40" Outer Wrap: Tape Wrapped Membrane Type: Tap or Brackish Water Membrane Sheet: TFC (Thin Film Composite) Element Type: Spiral Wound Feed Water Test Temperature: 77°F  (25°C) Single Element Recovery: 15% Chlorine Tolerance: 0 Feed water pH Range: 2-11 Can Replace:




DOW FilmTec TW30-2540
DuPont TW30-2540 80643
GE Desal AG2540TM
GE Desal AG2540TF
GE Desal 1206729 Manufacturer:

Applied Membranes, Inc.

Country of Manufacture:

United States (USA)

  

Note: Performance specifications based on 2,000 mg/l sodium chloride, 225 psi (1.6 MPa) applied pressure, 77ºF (25ºC) feed water temperature, pH 8 and the recovery listed in the table above. Element permeate flow may vary ± 20%.