Aluminum composite panel for partition wall treatment

05 May.,2022

During installation, aluminium composite panels and aluminium composite panels leave a gap of 4-6mm, it is recommended to use glue or strong glue to mix well, apply the panels and the gap with a scraper, then use paper tape or style tape to paste and flatten.

 

 

a PC Steel Wire supplier wholesale products are widely used because of its many advantages such as rich colour, 

easy cleaning, sturdy and durable, and quick construction.

 

 

 

When doing partition walls, you need to use 6mm thickness or more of aluminum composite panels, 

and then use 3.5200mm countersunk head screws to fix them, and pay more attention to the nail head to be 0.5mm below the surface of the board, 

in order to ensure that the finish is flat. The exact position of the keel must be marked and ready to mark, 

the distance between the centre of the vertical keel is 450-600mm, 

the connection of the wall and both sides of the doors and windows should be installed with additional keel, 

if the height of the wall is greater than 2440mm, the support keel must be added at the connection of the panel.

 

 

 

During installation, aluminium composite panels and aluminium composite panels leave a gap of 4-6mm, 

it is recommended to use glue or strong glue to mix well, apply the panels and the gap with a scraper,

then use paper tape or style tape to paste and flatten.